Page 189 - 2020 Allstar Performance Parts and Equipment Catalog

Screw-In Low Friction Lower Ball Joints
Lower Ball Joints Low friction economical OEM ball joints are SUSPENSION
ALL56216 (K727) high performance units designed for smooth
Fits Lefthander chassis style lower control arm suspension travel. Some ball joints are
available with longer than stock pin length
or where a large screw-in type ball joint is for correcting roll centers. Ball joints have
required. Replaces AFCO 20036). 1-1/2" taper hardened pins with stock type housings and
per foot.
are not rebuildable. Legal for classes that require non-take
apart ball joints. For off-road use only.
ALL56217 (K719) Part No. Type Length Taper Per Ft.
Compatible with stock lower control Replaces ALL56216 (K727)
arms modified with ALL56250 weld-in ALL56030 Screw-In Standard 1-1/2"
threaded sleeve. 1-1/2" taper per foot. ALL56031 Screw-In 1/2" Longer 1-1/2"
ALL56216 Housing With ALL56206 Pin
ALL56034 Screw-In Standard 2"
ALL56035 Screw-In 1/2" Longer 2"
Press-In ALL56214 Housing With ALL56206 Pin
Lower Ball Joints ALL56049 † Screw-In Standard 2"
ALL56050 † Screw-In 1/2" Longer 2"
ALL56206 (K6141)
ALL56051 † Screw-In 1" Longer 2"
Ball joint fits most tubular lower CT control Replaces ALL56210 (K5103)
arms and 1971-76 Impala. Taper fits most ALL56042 Press-In Standard 1-1/2"
fabricated and Impala spindles. Base O.D. is ALL56210 Housing With ALL56206 Pin
2.190". Replaces AFCO 20038. 2" taper per foot. ALL56027 Press-In Standard 2"
ALL56028 Press-In 1/2" Longer 2"
ALL56029 Press-In 1" Longer 2"
Replaces ALL56212 (K6117)
ALL56210 (K5103)
ALL56044 Press-In Standard 2"
Popular ball joint fits 1964-72 Chevelle and Replaces ALL56218 (K6145)
1967-69 Camaro. Base O.D. is 2.015". Replaces ALL56046 Press-In Standard 2"
AFCO 20033. 1-1/2" taper per foot. ALL56047 Press-In 1/2" Longer 2"
ALL56048 Press-In 1" Longer 2"
†Commonly used with ALL56256 ball joint adapter sleeve.
ALL56212 (K6117)
Ball joint fits Impala spindle. Can be Adjustable Lower Ball Joints
used to raise the roll center on Street Replace standard ball joint with an adjust-
Stock or Modified cars. Base O.D. is able mono-ball style lower ball joint. Includes
1.975". Replaces AFCO 20038-1. 2" adapter sleeve, ball, adjuster bushings, stud
taper per foot. and nut.
ALL56270 ..... Screw-In Chrysler Stud
(Common Dirt, ALL56216 Style)
ALL56218 (K6145) ALL56276 ......Screw-In GM Impala Stud (Common
Ball joint fits popular full-size 1977-89 Impala Asphalt) ALL56216 Style With
ALL56206 Pin
spindles. Also fits 1971-81 Camaro and ALL56272 ..... Press-In Large GM Impala Stud
1973-88 Chevelle/Malibu. Base O.D. is 2.090". (Common Asphalt, ALL56206 Style)
Replaces AFCO 20039. 2" taper per foot. ALL56274 ......Press-In Mid-Size GM Stud (ALL56218 Style)
Replacement Parts
Ball Joint Adapter Sleeve ALL56271 ..... Stud For ALL56270
ALL56273 ..... Stud For ALL56272 And ALL56276
ALL56256 ALL56275 ..... Stud For ALL56274
Adapter sleeve is ideal for modifying stock style ALL99092 ..... Housing For ALL56270 And ALL56276
Chevelle lower control arms to accept a screw- ALL99093 ..... Housing For ALL56272
in style ball joint. Adapter sleeve has an O.D. of 2.010" ALL99094 .... Housing For ALL56274
to take the place of a press-in style ball joint (ALL56210/ ALL58002 ..... Replacement Mono-Ball
K5103), allowing for installation of a screw in style ALL99096 .... Replacement Snap Ring
ALL56214 with a 1.5" taper/ft. pin or ALL56049 with a 2" ALL99097 ..... Replacement Spacer Kit
taper/ft. pin ball joint. Note: Modifications to control arms
may be necessary for proper fit of sleeve. Sleeve must be Adapter Bushing ALL56225
welded to the control arm after installation. Convert a 2" taper per foot hole to accept
a ball joint with a 1-1/2" taper per foot. For
lower ball joints only.

www.allstarperformance.com 187