Page 187 - 2020 Allstar Performance Parts and Equipment Catalog

Metric Spindles Impala Spindles STEERING
New replacement spindles for Direct replacement OE NEW!
1979-88 GM cars. Sold each. spindle for the 1977-96
ALL56318 ..... LH Impalas feature a 12° pin inclination,
ALL56319 ..... RH 2" per foot upper and lower ball joint
tapers and accept the large GM
Brake Rotors 1979-81
brake calipers.
Outer bearing race has a 1.97" O.D.
ALL55988 ..... LH
ALL42085 ..... Rotor With 12mm-1.50 Studs, 5 On 4-3/4" B.C. ALL55989 ..... RH
ALL42086 ..... Rotor With 5/8"-11 Wheel Studs, 5 On 5" B.C.
Related Components
Brake Rotors 1982-88
ALL42081 ..... Brake Caliper Big GM RH
Outer bearing race has a 1.78" O.D. ALL42082 ..... Brake Caliper Big GM LH
ALL42087 ..... Rotor With 12mm-1.50 Studs, 5 On 4-3/4" B.C.
ALL42088 ..... Rotor With 5/8"-11 Wheel Studs, 5 On 5" B.C.
Related Components Taper Reamers
ALL42084 ..... LH GM Metric Caliper Repair or enlarge tapered holes to accept tie rod
ALL42083 ..... RH GM Metric Caliper ends or ball joints. Reamers may be used in a drill
†
ALL72305 .... GM Intermediate Metric, 1979-81 with a 1/2" chuck by removing the T-handle.
ALL72306 .... GM Intermediate Metric, 1982-88
‡
ALL11170 ...... Reamer, 7.15°, 1-1/2" Taper Per Ft.
†Bearing For Race Or Cup With A 1.97" O.D.
‡Bearing For Race Or Cup With A 1.78" O.D. ALL11172 ...... Reamer, 9.56°, 2" Taper Per Ft.
Taper Reamer Specifications For Ball Joints
Metric Spindle Savers Part No. Taper Specs Part No. Taper Specs
ALL42130 Ball Joint Ball Joint
Stamped steel spindle savers ALL56204 1-1/2" Per Ft. ALL56217 1-1/2" Per Ft.
strengthen GM Metric spindles, rein- ALL56206 2" Per Ft. ALL56218 2" Per Ft.
2" Per Ft.
ALL56208
ALL56220
2" Per Ft.
forcing the steering arm portion of the spindle and making ALL56210 1-1/2" Per Ft. ALL56280 1-1/2" Per Ft.
them suitable for wheel-to-wheel racing. IMCA legal and ALL56212 2" Per Ft. ALL56284 1-1/2" Per Ft.
easily installed, spindle savers are retained by the lower ball ALL56214 1-1/2" Per Ft. ALL56286 1-1/2" Per Ft.
joint and tie rod end retaining nuts. Sold in pairs. ALL56216 1-1/2" Per Ft. – –
Replacement Parts
ALL42135 ..... Left Only
ALL42136 ..... Right Only Spindle Checker Tools
Assure correct alignment of the
GM Metric 3-Piece Spindles upper and lower ball joint
Three-piece GM metric G-Body when checking for bent
spindle is a forged and heat treated spindles. Insert slugs
direct replacement for a fac- into spindle and
tory spindle with the added guide rod will fit
benefit of a stronger, replace- through slugs if spindle isn’t bent. Kits fit most
able steering arm and brake aftermarket race and GM stock Metric spindles.
caliper bracket. Complete spindle ALL55976 ALL11176 ...... Kit With GM Lower, 2" Taper
includes a spindle body, bolt-on ALL11177 ...... Kit With Chrysler Lower, 1-1/2" Taper
steering arm, bolt-on brake bracket and a hardware kit. ALL11184 ...... Kit For GM Metric, 2" Taper
Spindle accepts stock 1979-88 G-body upper and lower Related Parts
ball joints, tie rod end, rotor, caliper and bearing kit. IMCA ALL99140 ..... GM Lower Slug With Nut (2" Per Ft.)
approved. Replacement components are also available for ALL99141 ..... Chrysler Lower Slug With Nut (1-1/2" Per Ft.)
quick, easy and affordable repairs. ALL99158 ..... GM Metric Lower Slug With Nut (2" Per Ft.)
ALL55976 ..... LH, 3-Piece Spindle Kit ALL99142 ..... Upper Slug With Nut (1-1/2" Per Ft.)
ALL55977 ..... RH, 3-Piece Spindle Kit. ALL99159 ..... GM Metric Upper Slug With Nut (2" Per Ft.)
ALL99143 ..... Replacement Guide Rod
Individual Parts
ALL55980 ..... Spindle Body
ALL55978 ..... LH Steering Arm ALL55978
ALL55979 ..... RH Steering Arm
ALL55981 ..... LH Brake Bracket
ALL55982 ..... RH Brake Bracket ALL55983
ALL55983 ..... Hardware Kit ALL55981 ALL55980

www.allstarperformance.com 185