Page 546 - Chief Architect Reference Manual
P. 546

Chief Architect X10 Reference Manual



                           and an angle of 180° displays it as wide   and stiles. Only available for Glass, Panel,
                           open. The Swing Angle for Bifold doors   and Louvered doors.
                           and double doors that swing from the cen-  • Specify the Width of the stiles and top
                           ter can be no more than 90°.           rail.

                           The Swing Angle also affects the door’s   • Specify the height of the Bottom rail.
                           appearance in 3D views if Draw Closed    Louvers -
                           is unchecked on the OPTIONS panel.    5

                         2  Specify the Size and Position of the   • Specify the Size, or vertical height, of the
                            selected door.                        selected door’s louvers. Only available
                        • Specify the Width, Height, and Thick-   for Louvered and Glass Louvered doors.
                           ness of the door. These values do not   • By default, louvers face the direction that
                           include the jamb.                      the door swings. Check Reverse Direc-
                        • Select the Elevation Reference from the   tion to reverse the direction that they face.
                           drop-down list. This determines where the   The Interior Doors settings are only
                           next two settings are measured from and   6  available when the selected door is
                           also affects their labels.           placed in an interior wall. See “Exterior and
                        • Specify the height to Top, measured from   Interior Walls” on page 349.
                           the selected Elevation Reference to the   •  Check Separate Trim and Materials for
                           top of the door frame.                  Each Side to specify the casing, lintels,
                        • Specify the height to Bottom, measured   and all materials for each side of the
                           from the selected Elevation Reference to   selected door independently. When
                           the bottom of the door frame.           unchecked, the two sides of the door use
                                                                   the same trim and materials.
                         3  Symbol Options - Check Reverse
                            Interior/Exterior to reverse the two   7  Check Include in Schedule to include
                        sides of the selected door so that they face   the selected door(s) in Door Schedules.
                        the opposite direction. Only available when a   See “The Schedule Tools” on page 668.
                        door symbol from the Library is specified as   A preview of the door displays on the
                        the Door Style. See “Door Sides” on page   8  right side of the dialog box. A label
                        538.                                    indicates which side of the door is its Interior
                         4  Panel Frame Options - Specify the   and which is its Exterior. See “Dialog
                            dimensions of the selected door’s rails   Preview Panes” on page 42.














                   546
   541   542   543   544   545   546   547   548   549   550   551