Page 704 - Chief Architect Reference Manual

Chief Architect X10 Reference Manual

• Specify the slab’s height to Bottom, Selected Line Panel
which is the height of its bottom surface,
measured from the Elevation Reference. The SELECTED LINE panel is available when
the selected edge is a line as opposed to an
• When the selected slab is a Post Footing arc. For information about the settings on
or Deck Post Footing, specify whether it this panel, see “Polyline Specification
is Square or Round. Not available for Dialog” on page 314.
manually drawn slabs or if the slab’s
shape has been modified using the Selected Arc Panel
Change Line/Arc edit tool. See
“Post with Footing” on page 841. The SELECTED ARC panel is available when
the selected edge is an arc as opposed to a
2 Specify the characteristics of the line. See “Change Line/Arc” on page 260.
selected slab’s Footing.
• Check Has Footing if you would like the Line Style Panel
slab to have a footing around the inside of For information about the settings on this
its perimeter.
panel, see “Line Specification Dialog” on
• Specify the Height and Width for the page 300.
footing.
• Specify the Footing Offset, which is the Fill Style Panel
distance that the footing extends out past The settings on the FILL STYLE panel affect
the edges of the slab. A value of 0 aligns the selected slab’s appearance in floor plan
the outside of the footing with the outside view. For information about these settings,
of the slab.
see “Fill Style Panel” on page 315.
3 A preview of the selected slab displays
on the right side of the panel. See Materials Panel
“Dialog Preview Panes” on page 42.
For information about the settings on this
Polyline Panel panel, see “Materials Panel” on page 1017.
The POLYLINE panel states the length of the Label Panel
selected slab’s Perimeter, its enclosed Area,
and its Volume See “Polyline Panel” on page Slab labels display in floor plan and cross
314. section/elevation views when the “Polylines
3D, Labels” layer is turned on and use the
If the selected Slab has any Holes in it, they Text Style assigned to that layer. The
will be subtracted from the Area and Automatic Label for slabs is blank, but you
Volume values. See “Slab Holes” on page can specify a custom label.
702.
For information about the settings on this
panel, see “Label Panel” on page 682.

704