Page 13 - ALL TASK SOLUTIONS - Our Brand Product Guide 2019

Introduction
VB45 was first developed to simplify the removal of diesel injectors
and glow plugs. Injectors and glow plugs were virtually impossible
to remove without damaging the cylinder heads but now with the
help of VB45 they can be removed easily. VB45 dissolves carbon
deposits, laquer, gums and varnishes along with all other
contaminants to ease the removal of injectors etc.
Air Intake Cleaning
Spraying the VB45 into the air intake just after the air mass meter or
directly into the intake manifold dissolves oil and soot
deposits, deriving from the crankcase ventilation and soot from the
EGR valve which are then transported by the air to the
combustion chamber.
Combustion Cleaning
The VB45 tends to burn slowly and therefore manages to penetrate
the deposits in the combustion chambers which once dissolved will
be eliminated through the combustion process. Normally the specific
cleaning of the combustion chamber is done with a combination of
VB45 and VB26.
Upper Exhaust Cleaning
A portion of the VB45 which was sprayed into the air intake passes
through the combustion chamber and reaches the exhaust where it
cleans the exhaust valves, the EGR valve, the turbine wheel and the
rotating vanes of the VGT turbo and the catalytic converter.
Lower Exhaust Cleaning
When the air intake, combustion chambers and upper exhaust are
cleaned the engine becomes noisier due to increased clogging of the
DPF. The deposits which were dislodged by the addition of VB45 and
VB26 end up in the DPF causing back pressure and increased engine
knocking. The deposits in the DPF are removed by spraying VB45 in
the upper exhaust with the hot engine running at idle and a regen-
eration after a couple of hours with the engine switched off.
Cleaning Deeper

VB45 is an excellent cleaner when used at each specific point
(A,B,C,D,E,F,G). However it does not always eliminate the cause of
the contamination. Therefore it is recommended that the full system
is cleaned at once (if you’re going to do a job, do it right) with a
combination of VB26, VB35 and VB45.
VB45: Air intake and combustion. Cleaning the compressor wheel of
the turbo charger, the intercooler, the (variable) manifold, the inlet
valves and the combustion chambers. MORE AIR AND CLEANER
COMBUSTION
VB35: Lubricating system. Cleaning the piston rings, the valve lifters
and the VVT valve timing system. OPTIMAL COMPRESSIONS &
CORRECT VALVE TIMING AND CLEANER COMBUSTION
VB26: Injection, combustion and exhaust upper. Cleaning the
injection system, the combustion chambers, the outlet valves, the
EGR valve, the turbine wheel of the turbo charger, the catalytic
converter.
PERFECT INJECTION & CLEANER COMBUSTION & CORRECT TURBO
CHARGING
VB45: DPF, cleaning the mounted filter eliminating from a
minimum of 80% up to 100% of soot deposits!!!!!!!!!!!