Page 12 - ALL TASK SOLUTIONS - Our Brand Product Guide 2019

WARNING

THIS APPLICATION MUST ONLY BE UNDERTAKEN BY
TRAINED PROFESSIONALS.

Spraying vb45 into the air intake just after the air mass meter
or directly into the intake manifold dissolves oil and soot
deposits deriving from the crankcase ventilation and soot
from the EGR valve which are then transported by the air to
the combustion chamber.
The soot and deposits are a fuel source for the diesel engine.
This fuel source has to be burnt off in a safe and controlled

manner or it could cause irreparable damage to the engine.

Diesel Air Intake Cleaning

Full System Cleaning

For a Full System Clean a can of vb26 may be added to the
fuel system and a can of vb35 added to the oil before doing
the Air Intake Cleaning with a can of vb45. On a return to the
workshop the vb45 may be used to clean the DPF.
Please see relevant pages on this website for vb26 and vb35.

Note

Do not over tighten the applicator when attaching it to the
can of vb45 as this may interrupt the flow and ensure that
the vb45 can is held in an upright position when dispensing.