Page 14 - ALL TASK SOLUTIONS - Our Brand Product Guide 2019
P. 14

A   Air Intake Cleaning (Petrol)

                                               Keep the engine at a constant rev, gradually spray the contents of the can into
                                            the manifold just after the air mass meter.
                                            Use the red hose from the Applicator Kit VBWT01 (supplied separately) for
                                            difficult to reach throttle bodies.

                                             B   Air Intake Cleaning (Diesel)


                                             Use the 4mt. hose and the Flow Regulator from the Applicator Kit to spray the

                                             cleaner inside the manifold after the air mass meter while driving the vehicle
                                             on the road. Further instructions are supplied with the Applicator Kit
                                             VBWT01. This application must only be undertaken by trained professionals.

                                             C   Removing Diesel Injectors

                                             Spray the cleaner on the deposits around the injectors.
                                             Allow time for deposits to soften. Repeat if necessary.

                                             D   EGR Valve Cleaning


                                             Ensure engine is switched off. Spray the inside of the EGR valve using the red
                                             hose from the Applicator Kit VBWT01. Allow time for deposits to soften.
                                             Repeat if necessary.

                                             E    VGT Turbo Cleaning

                                             Using the white straw or the red hose spray the inside of the turbo charger.
                                             This may be done with the engine switched off but preferably with the engine
                                             running. Allow time for deposits to soften. Repeat if necessary. See the
                                             technical data sheet “TDS-SYSTEM-EGR-VGT-500ml” for cleaning both the
                                             EGR valve and the VGT turbo charger.

                                             F     DPF Cleaning


                                             Run the engine for a few minutes to warm up the DPF. Connect the black hose
                                             from the Applicator Kit to the “Pressure Hose” upstream from the filter, to the
                                             adapter of the oxygen sensor or the temperature sensor or to any position
                                             between the engine and the particulate filter.
                                             Connect the black hose using the 4 meter extension hose to the Flow Regulator
                                             of the Applicator Kit.
                                             Connect the Flow Regulator to the can of VB45.With the engine running at idle,
                                             spray all of the contents into the filter.
                                             Switch off the engine and wait a minimum of three hours
                                             (the longer VB45 is left in the filter to work the more effective the result).
                                             Do a forced regeneration of the filter.


                                                   G     CAT Cleaning

                                             The procedure for cleaning the catalytic converter is the same as for cleaning
                                             the particulate filter



                                                           ALL TASK SOLUTIONS

                                         SMOG DOCTOR - VB45 EXTREME CLEANER
   9   10   11   12   13   14   15   16   17   18   19