Page 101 - FreesStyler® Installation and Startup

®
INSTALLATION AND STARTUP

Chapter 5 Entrance and Exit Photo-Eyes

Photo-Eye Available Styles

Part Number Description

PE 105854 Photo Eye Set (Floor Mounted)
PE 105855 Photo Eye Set (Wall Mounted)

Photo-Eye Available Options

Part Number Description
PE 105858 Heating Kit (1 Set)
PE 105859 Heating Kit (2 Sets)

Note: Read through this entire section to familiarize yourself with the Photo-Eye requirements
before installation.

Photo-Eye Layout and Description

By default the FressStyler® ships with one set of Photo-Eyes which will be installed at the entrance of
the bay. This single set can handle up to 5 functions (3 Enter operations, Door Operation and POS
Communication). Some of the typical items that are controlled by a single set of Photo-Eyes are Rust
Inhibitor, Undercarriage Wash and machine activation.

If On-Board Door Controls are utilized, the site must have at least two sets of Photo-Eyes. One set for
the entrance and one set for the exit.

The Photo-Eyes should be installed as close as possible to the entrance and exit door tracks and off-
set by 6” as shown below.

Photo-Eyes
with 6” Off-Set

Entrance Exit
Door Direction of Travel Door
Tracks Tracks

Photo-Eyes
with 6” Off-Set

Image Shown with Wall Mounted Photo-Eyes

1MANUL220 Belanger, Inc. * 1001 Doheny Ct. * Northville, MI 48167 * Ph (248) 349-7010 * Fax (248) 380-9681 5-1