Page 161 - FreesStyler® Installation and Startup

®
INSTALLATION AND STARTUP

Chapter 9 Optional “Add-On” Items

Water Softener

Functionality (Scanned)

Brine Tank
Included with a standard system is a brine make-up tank. These
tanks will accommodate loading of softener grade salt and
provide water to dissolve brine into a saturated liquid form.

Softened water is delivered to the brine tank by the control valve
during the normal regeneration sequence.
Brine tanks include an overflow connection to allow for a safety
in case of tank overflow.
Also included with the brine tank is the brine valve. The brine
valve is used to adjust the volume or brine to be produced for
each cycle.
For a multiple system installation, one standard brine tank is
required for each control valve.

Central Brine System
For larger, multiple systems, a Central Brining
System alternative is available. This will replace the
need for multiple brine tanks when installing multiple
units in parallel.
The Central Brining System has features similar to
the independent brine tanks; however, to
accommodate multiple systems, the brine refill is
accomplished by a float mechanism attached to the
softened water supply outlet of the system.
A check valve must be added to each softener on the
brine line for the unit to operate properly with the
Central Brining System. Depending on the CP unit
selected, the Venturi Throat and Brine Flow Control
may need to be changed.

1MANUL220 Belanger, Inc. * 1001 Doheny Ct. * Northville, MI 48167 * Ph (248) 349-7010 * Fax (248) 380-9681 9-29