Page 166 - FreesStyler® Installation and Startup
P. 166
®
INSTALLATION AND STARTUP
Chapter 9 Optional “Add-On” Items
Wheel Cleaning and CTA Options
Wheel Stingers and Freestanding CTA - Installation of Bell-Hose
2) Assemble the components as shown below. Connect one end of the hose to one of the
mounts then stretch the hose and cut to length. Secure that end in place with a clamp.
Now stretch the hose to the other mount and clamp into place
A field supplied 1/4” poly-flow tube is to be run from the one mount to the pressure switch
3) Secure the assembled parts and the plastic floor mat to the floor as shown below in the
appropriate location. The two floor mounts will be secured to the floor. The one in the
middle of the tunnel will have a plug installed in the end and the other one will have a 1/4”
push-in tube fitting installed
4) The Bell-Hose is to be secured to the floor 6” before the applicators. It only has to be
across half of the bay since only one of the tires is required to run over the hose and
activate it.
6”
9-34 Belanger, Inc. * 1001 Doheny Ct. * Northville, MI 48167 * Ph (248) 349-7010 * Fax (248) 380-9681 1MANUL220
