Page 35 - FreesStyler® Installation and Startup
P. 35
®
INSTALLATION AND STARTUP
Chapter 3 Getting Started
Installation Overview
Vehicle Height Considerations
The maximum vehicle height recommended is 84” (7 feet) tall.
Boom-Mount Location
• The Boom-Mount ships to the site at 72” long. When the machine position has been determined and the final
rail position has been set, then a measurement is taken from the utility side wall to the closest rail. The Boom
is then cut 3-1/2” shorter than this number. If the wall is more than 75-1/2” from that rail, then an extra leg
may need to be purchased to support the Boom.
Note: Please note the Boom-Mount location later in this manual and make sure no heaters lights
etc. will interfere with its placement.
Treadle and Guide Rail Placement
• The FressStyler® ships standard with a Vector™ Treadle and Y-Section.
• Placement of these items is determined from the machine centerline and the exit legs and can only be
determined after the length and width considerations above have been finalized.
1MANUL220 Belanger, Inc. * 1001 Doheny Ct. * Northville, MI 48167 * Ph (248) 349-7010 * Fax (248) 380-9681 3-11
