Page 86 - FreesStyler® Installation and Startup

®
INSTALLATION AND STARTUP

Chapter 4 Frame and Carriage Assembly

Optional On-Board Wheel Cleaner

There are two types of On-Board Wheel Cleaners.

Tools Required
3/4” wrench Adjustable Wrench
1/16” Allen wrench Safety Glasses

Installation of Components to Carriage Assembly

1) Shut off and lock out any power supply to the Freestyler.
2) Open the Freestyler’s side Utility Cabinets.
3) Remove any packaging material from Wheel Cleaning
Manifolds.
4) Remove the four 1/2-13 x 2” fasteners, and lock washers,
from the Upper Mount Plate.

5) Position the Upper Mount Plate inside of the Utility Cabinet so the fasteners holes are aligned with the clearance
holes found in the Utility Cabinets Base Plate.

6) Insert the fasteners up through the Base Plate, threading them into the Upper Mount Plate.
7) Locate the 3/4” hydraulic line packaged within the Utility Cabinet.
8) Position the 3/4” hydraulic line and secure it to the 3/4” JIC bulkhead found on the Upper Mount Plate.

4-44 Belanger, Inc. * 1001 Doheny Ct. * Northville, MI 48167 * Ph (248) 349-7010 * Fax (248) 380-9681 1MANUL220