Page 12 - Free Standing CTA™

FREE STANDING CTA

Introduction

Before You Get Started

Tools needed for installation:

miscellaneous hand tools safety glasses

work gloves hammer drill with 1/2” bit

Supplies Needed for Installation:

1/2” poly-flow tube 1/4” poly-flow tube
1/2” and 3/8” anchors or lag bolts
(depending on wall structure)

Equipment Included with Standard Tunnel System: Qty

MixStir™ with Timer Panel 1
CTA Primary Manifold Assembly 1
CTA Secondary Manifold Assembly 1
Bell-Hose Assembly with Switch 1

Equipment Included with Drive-Through System: Qty
MixStir™ with Timer Panel 1

CTA Primary Manifold Assembly 1
CTA Secondary Manifold Assembly 1
Bell-Hose Assembly with Switch 1
Crossover Tube Assembly 1

Equipment Included with Tire Tracking System: Qty

MixStir™ with Air Pump and Foaming Panel 1
CTA Primary Manifold Assembly 1
CTA Secondary Manifold Assembly 1

Note: Uncrate and inspect shipment for damage, and to verify that all pieces are there. If there is
any damaged equipment, file a claim with the trucking company immediately. Receiving
party is responsible for filing claim with trucking company. Notify your local distributor or
Belanger, Inc. immediately If shipment is determined damaged or incomplete.

8 Belanger, Inc. * PO BOX 5470 *Northville, MI 48167-5470 * Ph (248) 349-7010 * Fax (248) 380-9681 1MANUL089