Page 23 - Kondor® KL 1 - E-1063 Programming and Operation Manual

®
KL1: 1063 PROGRAMMING AND OPERATION

Chapter 3 Operator Interface/Programming

Setup

Setup / Application Setup

E-1063 Screen Key
· Columns FILL, DWELL and PURGE are measured in seconds.
· Values may be changes in increments of tenths of a second.
· Reclaim: Toggles between YES/NO to select the Reclaim Output on
or off per application
· Tank: Toggles between SMALL/LARGE to select the desired tank per
application
· Enter OP Reclaim: Toggles between Enabled/Disabled to select the
Reclaim Output on or off during Entrance Operation

Fill Time: Delays motion while the application is filling.

Dwell Time: Delays starting the next pass to allow chemical to soak on the vehicle longer. Typically the speed of
the Return Pass determines the soak time of the chemical.

Purge Time: Delays starting the next pass while turning on the Purge Air. Presoaks turn on the Purge Air during
Arm motion. All others turn on Purge Air once e Am motion is complete.
Note: Setting the Purge timer too large will unnecessarily add to Cycle Time.

Setup / Advanced Configuration

See Chapter 4.

1MANUL126 Belanger, Inc. ®* PO BOX 5470 * Northville, MI 48167-5470 * Ph (248) 349-7010 * Fax (248) 380-9681 3-3