Page 31 - Airblade® Dryer - Mix and Match
P. 31

AIRBLADE® DRYER Mix and Match



                       Installation


                       2-Nozzle Frame Assembly: Wall Mounted

                                 •   Secure the Housing Lift Assembly to the fork as shown below.






















                                 •   Move the housing to the appropriate location.
                                 •   Retighten the AirBlade® Housing Bracket and remove the Housing Lift Assembly.
                                 •   Repeat these steps on the other housing.


















                                 •   When completed remove the Housing Lift Assembly, replace the fasteners and store
                                     the Lift Assembly for future use.
                              13) Once the housings are centered to the door you can tighten the fasteners that attach the
                                 head beam to the wall mount brackets.


















                        1MANUL011                             Belanger, Inc. * 1001 Doheny Ct. * Northville, MI 48167 * Ph (810) 349-7010 * Fax (810) 380-9681                            27
   26   27   28   29   30   31   32   33   34   35   36