Page 23 - Tunnel Support Components

TUNNEL SUPPORT COMPONENTS

Installation

Pneumatic Air- Panel Overview

There are two available Air-Panels for the Dura-Trans™ Classic Conveyor. Confirm that you have the
correct Air-Panel to fit your application. If you have concerns, contact your nearest Belanger
Representative.
102066 102006
Air-Support System Panel Optional Roller-Up Panel

This panel ships standard with all systems such as:
Enduro 60™, Pro 100™, insta-KLEEN™ and Global This panel ships standard with all Dura-Trans™
Classic Entrance Sections
40™
The Regulator and 4-Way Valve will feed the
The Main System Air Filter/Regulator will feed other Roller-Up Cylinder
pieces of equipment in the system

Dimensions
10-1/2” tall 19” wide 4-3/4” deep
Pneumatic Panels are used to distribute the correct amount of pneumatic pressure to a given component
at the correct time and intervals in order to follow the sequence programmed at the controller. Your
system can have as few as 2 Pneumatic Panels or as many as 8.
The Enduro Class 60 system comes with the following panels:
• Conveyor, Part #102098
®
• Gyro Wrap , Part #102022
The Pro Class 100 system comes with the following panels:
• Conveyor, Part #102098
®
• Wave Full Side Washer , Part #102060
®
• Wave Wrap driver side, Part #102025
• Wave Wrap passenger side, Part #102026
®
Panel utility installation and adjustments are covered in their corresponding component manual.

1MANUL760 Belanger, Inc. * 1001 Doheny Ct. * Northville, MI 48167 * Ph (248) 349-7010 * Fax (248) 380-9681 21