Page 185 - Saber® Installation & Startup
P. 185
INSTALLATION & STARTUP
Chapter 15 MixStir® Options
MixStir® Triple Foam / SDM Configuration Overview
If the MixStir Triple Foam Option was selected it is important to note a difference in the SDM configuration as shown
below.
The SDM Pumps are not used in this application.
Accompanied with the purchase of the MixStir® Triple Foam is a manual to not how to connect the option to the Saber®
Machine. Below shows how to route the triple foam air line to the proper location.
This allows for 3 programmable wax passes. One at low pressure using both arms simultaneously, one at
medium pressure which also uses both arms and one at high pressure using one arm at a time.
This option will require the Belanger MixStir® tank to be installed.
1MANUL290 Belanger, Inc. * PO BOX 5470 * Northville, MI 48167-5470 * Ph (248) 349-7010 * Fax (248) 380-9681 15-1
