Page 39 - Saber® Installation & Startup

INSTALLATION & STARTUP

Chapter 3 Getting Started

Fastening Needs and Other Required Materials
Pneumatic Manifold
1/4” black poly-flow tubing To Pump Station low pressure valve
1/4” orange poly-flow tubing To Pump Station high pressure valve
1/4” blue poly-flow tubing To Pump Station small tank pinch valve
1/4” grey poly-flow tubing To Pump Station large tank pinch valve
1/4” red poly-flow tubing To Pump Station Rocker valve
1/2” black poly-flow tubing (1 line) From Compressor to main air regulator
(1 line) To Wall Manifold purge air
(1 line) To Wall Manifold foam air

Solution Delivery Module (SDM)
3/8” threaded wall anchors (4) holes to mount frame
3/4" water hose (1) from Presoak valve to Wall Manifold
(1) from Drying Agent to Wall Manifold
(1) from optional Sealer Wax to Wall Manifold
(1) pressure relief valve to drain
(1) from Foam Wax bypass to drain
(1) from Foam Wax to Wall Manifold

Water Softener
1-1/4” copper sweat fitting

SALT

Undercarriage
1/2" anchors (4) holes to mount frame

Rocker Spin Clean
-- Utilities included with Undercarriage

Rocker (side) Blasters
1/2" anchors (8) 4 per side; 2 per leg

Spot Free (RO)
-- All utilities included with component purchase

Wait / Go Sign
3/8” anchors (4) holes to mount frame

Navigational (In-Bay) Sign
3/8” anchors (4) holes to mount frame

1MANUL290 Belanger, Inc. * PO BOX 5470 * Northville, MI 48167-5470 * Ph (248) 349-7010 * Fax (248) 380-9681 3-15