Page 41 - Saber® Installation & Startup

INSTALLATION & STARTUP

Chapter 3 Getting Started

Saber® Utility Recommendations Floor Mounted
Listed below is a list of hardware and/or utility supplies needed for a successful Saber® floor mounted
system. All of these items can be purchased through the Belanger Aftermarket group, using the
referenced part numbers.
We recommend using threaded rod, back plates, washers and nuts to mount and secure the Wall
Boom mount. High quality 1/2" by 3-3/4” lag bolts are recommended for the Undercarriage and
Rocker Spin Clean, and 3/8” anchors are recommended to mount the SDM panel and Signs. Hose
clamps and tie wraps are also suggested for your convenience. Other items such as 1” and 3/4”
hydraulic hose and fittings are also required for proper installation, but are not listed, and will need to
be obtained in the field. If desired an optional Thru-Wall Plate Kit can be ordered (p/n# 107362), and
will assist in routing the utilities from the bay to the equipment room.

Part Number Qty. Description
6115 4 3" sq. back plates for threaded rod

1FSTNR-ST750 50 Kwick-Bolt 5/8" x 6" stainless steel anchor
1STEEL-TH415 2 1/2-13 threaded rod 18-8 stainless steel x 36" long

1NUT-RG637 8 1/2-13 stainless steel steel nut
1WASHR-LC456 4 1/2” loc-washer stainless steel

1WASHR-FL706 8 1/2" flat washer stainless steel
1CLAMP484 1 3/4" single ear hose clamp bag of 50

1HOSE675 1 3/4" blue water hose 200 PSI x 250' reel
1AIRLN-839 1 1/2" black poly x 100' bag
1AIRLN635 1 3/8" natural poly x 100' bag

1AIRLN170 1 1/4" black poly x 100' bag

1AIRLN248 1 1/4" blue poly x 100' bag
1AIRLN523 1 1/4" red poly x 100' bag
1AIRLN315 1 1/4" gray poly x 100' bag

1AIRLN413 1 1/4" orange poly x 100' bag
1TIE800 2 Cable Tie heavy duty bag of 100

1MANUL290 Belanger, Inc. * PO BOX 5470 * Northville, MI 48167-5470 * Ph (248) 349-7010 * Fax (248) 380-9681 3-17