Page 40 - Saber® Installation & Startup
P. 40
INSTALLATION & STARTUP
Chapter 3 Getting Started
Saber® Utility Recommendations Wall Mounted
Listed below is a list of hardware and/or utility supplies needed for a successful Saber® wall mounted
system. All of these items can be purchased through the Belanger Aftermarket group, using the
referenced part numbers.
We recommend using threaded rod, back plates, washers and nuts to mount and secure the Wall
Boom mount. High quality 1/2" by 3-3/4” lag bolts are recommended for the Undercarriage and
Rocker Spin Clean, and 3/8” anchors are recommended to mount the SDM panel and Signs. Hose
clamps and tie wraps are also suggested for your convenience. Other items such as 1” and 3/4”
hydraulic hose and fittings are also required for proper installation, but are not listed, and will need to
be obtained in the field. If desired an optional Thru-Wall Plate Kit can be ordered (p/n# 107362), and
will assist in routing the utilities from the bay to the equipment room.
Part Number Qty. Description
6115 20 3" sq. back plates for threaded rod
1FSTNR-ST750 14 Kwick-Bolt 5/8" x 6" stainless steel anchor
1STEEL-TH415 10 1/2-13 threaded rod 18-8 stainless steel x 36" long
1NUT-RG637 40 1/2-13 stainless steel nut
1WASHR-LC456 20 1/2” loc-washer stainless steel
1WASHR-FL706 40 1/2” flat washer stainless steel
1CLAMP484 1 3/4" single ear hose clamp bag of 50
1HOSE675 1 3/4" blue water hose 200 PSI x 250' reel
1AIRLN-839 1 1/2" black poly x 100' bag
1AIRLN635 1 3/8" natural poly x 100' bag
1AIRLN170 1 1/4" black poly x 100' bag
1AIRLN248 1 1/4" blue poly x 100' bag
1AIRLN523 1 1/4" red poly x 100' bag
1AIRLN315 1 1/4" gray poly x 100' bag
1AIRLN413 1 1/4" orange poly x 100' bag
1TIE800 2 Cable Tie heavy duty bag of 100
3-16 Belanger, Inc. * PO BOX 5470 * Northville, MI 48167-5470 * Ph (248) 349-7010 * Fax (248) 380-9681 1MANUL290
