Page 44 - DuraTrans XD® Conveyor
P. 44

DURATRANS XD® CONVEYOR



            Installation


            Optional Reversing Valve

               Reversing Valve Overview














                                                     Top View


                   1)  Locate the Accessory Box labeled “Reversing Valve Kit”.
                   2)  Verify that all the parts and components are present.
                   3)  Install the four hydraulic fittings and the valve handle as shown below.

               Assembly












                    Install both Straight
                         Fittings here


                      Install the Elbow
                     Fittings in the “IN”
                       and “Out” ports

                                                                             Secure handle into
                                                                             place using Cotter Pins




                   NOTE:  BE SURE TO INSTALL THE HANDLE IN THE SAME
                           ORIENTATION AS SHOWN IN THE ABOVE IMAGE. IF DURING
                           OPERATION THE HANDLE WILL NOT REST IN THE DETENT
                           POSITION, IT IS LIKELY THAT THE HANDLE HAS BEEN
                           INSTALLED BACKWARDS.





            40      Belanger, Inc®. * PO BOX 5470 * Northville, MI 48167-5470 * Ph (248) 349-7010 * Fax (248) 380-9681        1MANUL010
   39   40   41   42   43   44   45   46   47   48   49