Page 46 - DuraTrans XD® Conveyor
P. 46
DURATRANS XD® CONVEYOR
Installation
Optional Reversing Valve
Reversing Valve Operation
· When the valve handle is fully engaged in the “detent” position, the Conveyor Motor
should turn counter clockwise (pulling vehicles from entrance to exit). If the motor
rotation is incorrect, switch the hoses connected to ports A and B.
· When the valve handle is pulled from the previous position to the center position, the
valve is now in a “Neutral” position. The Conveyor Motor will not turn.
· When the valve handle is pulled from the Neutral position to the “Momentary” position,
the Conveyor Motor will now turn. Confirm that the Conveyor is moving from
entrance to exit on the surface.
The Conveyor will “REVERSE”. This valve position in momentary. Holding this position
too long could result in Conveyor Jams.
42 Belanger, Inc®. * PO BOX 5470 * Northville, MI 48167-5470 * Ph (248) 349-7010 * Fax (248) 380-9681 1MANUL010
