Page 40 - DuraTrans XD® Conveyor
P. 40

DURATRANS XD® CONVEYOR



            Installation


            Installing the Plastic Guide Rail

                                                     Helpful Hint
                                    The following procedure requires field fabrication
               1)  Locate the supplied Guide Rail FIXTURE CLAMP (part #102941) as shown below.















               2)  Slide the plastic guide rail onto the guide rail angle starting with a 10 FT section at the
                   entrance.
































                                          5 foot Center Section shown above

                   Note:  This section will cover the 5 FT entrance and 5 FT of the next section. As you have a 5 FT
                          center section installed, the plastic has to be cut down to 7 foot 6 inches. This will cover the
                          exit end of the previous section and half or 2 foot 6 inches of that 5 FT section.









            36      Belanger, Inc®. * PO BOX 5470 * Northville, MI 48167-5470 * Ph (248) 349-7010 * Fax (248) 380-9681        1MANUL010
   35   36   37   38   39   40   41   42   43   44   45