Page 37 - DuraTrans XD® Conveyor
P. 37

DURATRANS XD® CONVEYOR



                      Installation


                      Utility Connections

                          Electrical Connections
                           Floor Treadle Limit Switch
                             1)  Remove the cover from the Treadle assembly.
                             2)  Locate the limit switch and secure it into place while running the wire through the chase
                                 tube and out the other end.









                                                                 Limit Switch

                             3)  Run the wire through the floor mounted Wire Chase (shown below) and to the appropriate
                                 INPUT Channel on your controller.
                                                                Wire Chase

                                       Feed to controller                               From limit switch



                          Hydraulic Connections
                          Install hydraulic hoses from the hydraulic power pack to the Hydraulic Drive Unit as shown below
                          (hydraulic hoses are field supplied).
                                    Helpful Hint
                           Drive Unit can be rotated to allow feeds              Hydraulic Feeds
                            to face either up, down, left or right.

                              Breather Plug MUST face up.


                                                                                                Breather Plug



                             Note:  Procedures for securing the Sprocket into place are covered on
                                    the next page(s).














                      1MANUL010           Belanger, Inc.® * PO BOX 5470 *Northville, MI 48167-5470 * Ph (248) 349-7010 * Fax (248) 380-9681     33
   32   33   34   35   36   37   38   39   40   41   42