Page 22 - FreeStyler® E-1063 Programming and Operation Manual

E-1063 PROGRAMMING AND OPERATION

Chapter 3 Operator Interface/Standard User Screens

User

E-1063 Screen Key
• Carriage Home: Moves the Carriage to the Home position
• Carriage Find Limit: Causes the machine to locate Entrance limit
• Reset: Resets and Homes machine
• Force: Moves you to the Force screen
• Jog: Moves you to the Jog screen
• Monitor inputs: Moves you to the Monitor Inputs screen
• Monitor Outputs: Moves you to the Monitor Outputs screen
• About: Moves you to the About screen
Machine MUST be in Home position to perform a “Carriage Find Limit”.

Note: The Carriage Find Limit must be performed on a machine that is a new install before any vehicles are
washed. This function typically does not need to be performed again after it has been completed once.

If pressing the reset button does not reset the machine, check Fault screen for reoccurring fault.
User / Force
E-1063 Screen Key
Pressing the Force Enabled/Force
Disabled toggle button alternates
between the fields shown below:
/

To force an Output fill the oval next to the desired output, then press the “Force Enabled/Disabled” toggle button.
To turn off Force, press the “Force Enabled/Disabled” toggle button.

Note: Force may be left “Enabled” while changing between forced Outputs.

3-2 Belanger, Inc. * 1001 Doheny Ct. * Northville, MI 48167 * Ph (248) 349-7010 * Fax (248) 380-9681 1MANUL224