Page 8 - Photo Eye (Basic)

PHOTO EYE (Basic)

Introduction

Congratulations on your purchase of the Belanger, Inc. Photo Eye. The purpose of this manual is to
familiarize you with how the Photo Eye is installed and how it operates.

The Belanger, Inc. Photo Eye is designed to turn designated machines on and off by an “Emitter” sending an
invisible light beam to a “Receiver”. When the beam is interrupted, a relay switch is activated which starts the
designated machine. The machine will continue to run until the two beams once again make contact or at the
end of the preset timer cycle. The Belanger, Inc. Photo Eye barrel sensors are very durable, leak proof and
powerful. Their extremely high access gain (700 foot) provides enough sensing power to penetrate extreme
humidity levels. The electronics are completely epoxy-encapsulated for maximum resistance to shock,
moisture and vibration.

The Belanger, Inc. Photo Eye system can be used for the following operations:
• Tunnel entry
• Wind door activation
• Component activation
Whether you have already operated a car wash or you are new to our industry, you know the importance of
the appearance of a car wash and its equipment to the customer. Keeping the equipment clean will not only
make the equipment easier to maintain, it will act as an example to your customer to keep their equipment
(their automobile) clean as well. Replacing the cloth as necessary will also help the image of your wash and
keep the customer coming back.
Read through the entire manual to familiarize yourself with the Photo Eye before installation. When
installation is completed, you will want to keep this manual as a guide to proper maintenance.

Available Styles
Part Number Description

PE 105131 Wind Door Photo Eye Kit (Floor Mounted)
PE 105128 Entrance Photo Eye Kit (Floor Mounted)
Call Wind Door Photo Eye Kit (Wall Mounted)
Call Entrance Photo Eye Kit (Wall Mounted)

6 Belanger, Inc. * 1001 Doheny Ct. * Northville, MI 48167 * Ph (248) 349-7010 * Fax (248) 380-9681 1MANUL585