Page 14 - Jet Pumping Station

JET PUMPING STATION

Installation

Assembly

6) Install outlet plumbing from the outlet port of the unloader valve to the desired piece of equipment. The
outlet feed should be flexible hose from the unloader valve to any hard piping, solenoid or tees.

Outlet Port

CAUTION

Hose MUST be rated for a minimum pressure of 1500 PSI. Remember that the plumbing has direct
bearing on pressure at the nozzle (massive pressure drops are common to an incorrectly installed
system).
6) Install 3 phase wiring in accordance with any and all local and national codes (direction is reversible).

Use caution, this machine starts automatically. Avoid contact with high pressure spray, as serious
personal injury may occur.

12 Belanger , Inc. * 1001 Doheny Ct. * Northville, MI 48167 * Ph (248) 349-7010 * Fax (248) 380-9681 1MANUL361