Page 13 - TopWinder®
P. 13
®
®
TopWinder
Specifications
Requirements
Physical
Tunnel space required 118-1/2”
Unit height 133”
Unit width 150-7/8”
Utility
Electrical 3 phase, 60Hz Motor: 1HP STDV or 1HP 575V
110V for Retract Option
Pneumatic
.3 CFM @ 90 PSI minimum 120 PSI maximum
Water (1) 3/4” hose @ 4 GPM @ 40 PSI
Hydraulic 4 GPM @ 900 PSI
Output
Physical
Vehicle clearance, height 90”
DISCONNECT AND LOCKOUT ELECTRICAL POWER BEFORE SERVICING ANY
EQUIPMENT!
CAUTION
Always wear safety glasses when performing maintenance on any equipment.
CAUTION
It is recommended that a licensed electrician is contracted to perform all electrical installations.
YOUR HYDRAULIC SYSTEM MUST BE CAPABLE OF ADJUSTMENT TO 116 RPM AT
900 PSI (62.1 BAR) WHILE LOADED AGAINST VEHICLE. PLEASE VERIFY YOUR
SYSTEMS CAPABILITY TO MEET THESE SETTING WHILE RUNNING A VEHICLE
PRIOR TO INSTALLING PIECE OF EQUIPMENT
A compressed Air System should be set correctly to support 90 PSI necessary to operate
equipment, but should never be set to deliver more than 120 PSI air pressure to the Belanger®
specified equipment.
1MANUL755 Belanger, Inc.® * 1001 Doheny Ct. * Northville, MI 48167 * Ph (248) 349-7010 * Fax (248) 380-9681 9
