Page 16 - TopWinder®

®
®
TopWinder

Installation

Frame Assembly
Attaching the Crossbeam

1) Locate the Crossbeam. See the image below.

Mount to
Passenger Side
Arm Assembly
Spray Nozzle
Openings Mount to Drive Side
Arm Assembly

2) Secure the Cross Beam to the arms, as shown below, using 1/2-13 x 1-1/4” bolts and 1/2”
lock washers.
Before completely tightening the Cross Beam, be sure to take a measurement at both
ends of the arms to make sure the frame is square. Once square, tighten all bolts.

Cross Beam

Secure the Crossbeam to the Arms

Spray Nozzle
Openings
Driver Side Arm
Assembly
Passenger Side
Arm Assembly

ORIENTATION NOTE: When completely assembled the Spray Nozzles in the Crossbeam will face the Hub.

3) The Crossbeam Assembly comes with the Filler Strip installed. Check to make sure the
Filler Strips are secure and are the proper length.

12 Belanger, Inc. ®* 1001 Doheny Ct. * Northville, MI 48167 * Ph (248) 349-7010 * Fax (248) 380-9681 1MANUL755