Page 22 - TopWinder®

®
®
TopWinder

Installation

Auto Retract
Overview
The Auto Retract includes a set of Photo-Eyes that mount on each of the Leg Assemblies of the
TopWinder® to detect the presence of a pickup truck.
Note: The Auto Retract MUST be mounted to the outside of the Leg Assemblies with the Photo Eyes
on the entrance side of the TopWinder® as shown below.

Driver Side Photo Eye Passenger Side Photo-Eye
Emitter Receiver

The Photo-Eyes are recommended to be installed at the height shown below.

Both upper Photo
Eyes to be set at 60”
from floor

Both lower
Photo Eyes to
be set at 40”
from floor

Note: When installing the Auto Retract, take care not to scratch the powder coating on the frame.
After mounting and wiring the Photo-Eyes to the Leg Assemblies you will need to cut the Filler
Strips to fit around the Photo-Eyes.

18 Belanger, Inc. ®* 1001 Doheny Ct. * Northville, MI 48167 * Ph (248) 349-7010 * Fax (248) 380-9681 1MANUL755