Page 28 - TopWinder®

®
®
TopWinder

Installation

Air Panel & Air Cushion Installation

There are two air valves on the TopWinder® Air Panel, both are fed by the same air source. The
retract is regulated on the Air Panel and the Air Cushion is regulated by the regulator mounted on
the passenger side Leg Assembly.

1) Locate the Air Panel and secure it to the wall.

Air Cushion Valve
1/4” Field Supplied Airline

Retract Regulator

Air Panel Assembly

Note: The Air Panel will need to be mounted to the wall, preferably in the equipment room.
2) Run a 3/8” poly-flow airline from the Air Cushion Valve on the Air Panel to the Air
Cushion Regulator mounted on the passenger side Leg Assembly.
3) Run a 3/8” poly-flow airline from the Air Cushion Regulator to one side of the Shuttle
Valve on the Cylinder.
4) Run a 3/8” poly-flow airline from the other side of the Shuttle Valve on the Cylinder to
the Retract Regulator on the Air Panel.

Passenger Side
Leg Assembly
Shuttle
Valve

3/8” Airline from Air Cushion
Air Cushion Valve
Regulator
3/8” Airline to Air
Cushion Regulator

Cylinder

3/8” Airline for
Air Cushion Cylinder Retract
Regulator
Retract
Regulator

24 Belanger, Inc. ®* 1001 Doheny Ct. * Northville, MI 48167 * Ph (248) 349-7010 * Fax (248) 380-9681 1MANUL755