Page 31 - TopWinder®
P. 31
®
®
TopWinder
Installation
Counter Weights Installation
9) Insert the 3 black plastic clips into the holes to secure the 2-piece weight cover.
Plastic Clip (typical)
Front View
10) Drill a 1/4” hole from the bottom of the cover at 1-1/2” inward from the edge as shown below.
Note: This hole will allow water to drain out of the cover.
Front View Bottom View
1-1/2”
Drill Here
11) In a situation where the Counter Weights are not needed, place the Rear Cover on the back
of the arm and tighten it down with the provided 1/2-13 x 1” bolts and the flat washers.
1MANUL755 Belanger, Inc.® * 1001 Doheny Ct. * Northville, MI 48167 * Ph (248) 349-7010 * Fax (248) 380-9681 27
