Page 36 - TopWinder®

®
®
TopWinder

Installation

Installing the Drive Shaft and Hub Assembly

14) Locate the Locking Collar from the Accessory Box.

Step 14:
Orient the Locking Collar; it is to be
Locking Collar installed with the groove facing away
from the Shaft Bearing.

15) Slide the Locking Collar over the Drive Shaft, position it in the groove and tighten, see below.

Step 16:
Tighten set screws on
all Shaft Bearings.

Step 15:
Slide the Locking Collar over
the Drive Shaft, position it in
groove and tighten.

16) Make sure the Locking Collar is resting on the top of the Shaft Bearing and then tighten the set
screws on all of the Shaft Bearings.

32 Belanger, Inc. ®* 1001 Doheny Ct. * Northville, MI 48167 * Ph (248) 349-7010 * Fax (248) 380-9681 1MANUL755