Page 34 - TopWinder®

®
®
TopWinder

Installation

Installing the Drive Shaft and Hub Assembly

7) On the passenger side of the Drive Shaft, slide only the Inside Mount/Bearing Assembly onto the
Shaft as shown below.

Step 7:
Slide on the Inside
Mount/ Bearing
Assembly.

Grease Fitting on
Bearing must face out Passenger Side of Drive Shaft

8) On the driver side of the Drive Shaft, slide on the Inside Mount/Bearing Assembly and then the
Outside Mount. Secure the assemblies together using the outermost mounting bolt. Refer to
the image below for proper installation of the parts.

Step 8a: Step 8b:
Slide on the Inside Mount/ Slide on the Outside Mount.
Bearing Assembly.

Driver Side of Drive Shaft

Grease Fitting on
Bearing must face out Step 8c:
Secure mounts together
with the outermost bolt.

9) Lift and slide the Drive Shaft and Hub Assembly into the end of the Arm Assemblies as shown
below.

Passenger Side

Driver Side

Step 9:
Slide Drive Shaft and Hub
Assembly into the end of the
Arm Assemblies.

30 Belanger, Inc. ®* 1001 Doheny Ct. * Northville, MI 48167 * Ph (248) 349-7010 * Fax (248) 380-9681 1MANUL755