Page 35 - TopWinder®

®
®
TopWinder

Installation

Installing the Drive Shaft and Hub Assembly

10) On the passenger side, secure the Outside Mount to the Arm and the Inside Mount/Bearing
Assembly using the mounting bolts removed previously. Reattach the End Cap to the Arm
Assembly.

Passenger Side

Step 10a:
Secure the Mounts to
the Passenger Side
Arm Assembly.

11) On the driver side, secure the Outside Mount and Inside Mount/Bearing Assembly to the Arm
using the bolts removed earlier. Then reattach the Shaft Bearing to the Outside Mount. Refer to
the image below for proper installation of the parts.

Driver Side

Step 11a:
Insert the remaining bolt and
secure the Mounts to the
Driver Side Arm Assembly.
Step 12:
Reattach the End
Cap to the Arm.
Step 11b:
Reattach the Shaft
Bearing to the Outside
Mount. Grease Fitting on
Bearing must face out
12) Reattach the End Cap to the Driver Side Arm Assembly.

13) On the driver side make sure the Locking Collar Groove on the Drive Shaft is past the bearing
and is completely visible.

Drive Shaft

Step 13:
Locking Collar Groove must
be completely visible.

1MANUL755 Belanger, Inc.® * 1001 Doheny Ct. * Northville, MI 48167 * Ph (248) 349-7010 * Fax (248) 380-9681 31