Page 12 - Quad Wave Mitter®

®
QUAD WAVE MITTER

Specifications

Requirements

Physical
Tunnel space required 84” minimum
Unit height 125”
Unit width 146”
Utility
Electrical 2HP, 3 Phase, 208/240/408VAC

Water (2) 3/4” pipe @ 6 GPM @ 40 PSI

Output

Physical
Vehicle clearance, height 90”
Vehicle clearance, width 127”

DISCONNECT AND LOCKOUT ELECTRICAL POWER BEFORE SERVICING ANY
EQUIPMENT!

Always wear safety glasses when performing maintenance on any equipment

It is recommended that a licensed electrician is contracted to perform all electrical installations.

A compressed Air System should be set correctly to support 90 PSI necessary to operate
equipment, but should never be set to deliver more than 120 PSI air pressure to the Belanger
specified equipment.

Note: YOUR HYDRAULIC SYSTEM MUST BE CAPABLE OF ADJUSTMENT TO 76 RPM
AT 900 PSI (62.1 BAR) WHILE LOADED AGAINST VEHICLE. PLEASE VERIFY
YOUR SYSTEMS CAPABILITY TO MEET THESE SETTING WHILE RUNNING A
VEHICLE PRIOR TO INSTALLING PIECE OF EQUIPMENT!

8 Belanger, Inc. * 1001 Doheny Ct. * Northville, MI 48167 * Ph (248) 349-7010 * Fax (248) 380-9681 1MANUL633