Page 16 - Quad Wave Mitter®

®
QUAD WAVE MITTER

Installation

Utilities

Water
The water manifold can be manipulated to accommodate the main water feed from either side
of the unit.

It is recommended that a licensed plumber is contracted to perform all of the water
installations.
1) Determine the side in which you would like to supply water to. Assemble the supplied Brass Tee
and Barbed Hose Fitting for that side as shown below.
2) Assemble the remaining Barbed Hose Fitting on the other side.
3) Connect the cross-over hose to both sides as shown below. Supply a 3/4” water feed to the
remaining Barbed Hose Fitting.
®
Note: Fittings require a water sealant. We recommend using Teflon tape, pipe dope or an
equivalent.

Barbed Hose Fitting Water Water Brass Barbed Hose
Feed Feed Tee Fitting

Manifold without “Tee” Manifold with “Tee”

12 Belanger, Inc. * 1001 Doheny Ct. * Northville, MI 48167 * Ph (248) 349-7010 * Fax (248) 380-9681 1MANUL633