Page 44 - Gyro Wrap™ Signature ® Series
P. 44
GYRO WRAP™ Signature ® Series
Installation
Utilities: Pneumatic, Water and Electrical
Water Manifold Installation
The following image shows the installation of the water manifolds for a passenger side main water feed.
1) Locate the following components.
Main water feed
Passenger
Clamps (7) Side Arm
Connector Hose water feed Driver Side
Arm water
feed
Connector Hose
2) Using the supplied clamps, secure the hoses to the barbed hose fittings as shown below.
Clamp
Clamp
Clamp
29-5/8” Hose
Clamp
32-3/4” Hose
3) Position the Manifold Assembly into the crossbeam as shown below. The fittings facing downward
are to pass through the holes in the crossbeam and the unfilled holes In the filler strips.
4) Using the supplied clamps, secure the hoses sticking out of the base of the arms to the downward
facing barbed hose fittings.
5) Run a field supplied 1/2” water feed to the main feed, barbed hose fitting.
6) Make sure all clamps have been tightened
7) Once the water connections are made and everything is tightened, you can run the water through
the system to flush out the manifolds.
40 Belanger, Inc. * 1001 Doheny Ct. * Northville, MI 48167 * Ph (248) 349-7010 * Fax (248) 380-9681 1MANUL248