Page 39 - QuickFire® Wrap Around Signature® Series

QUICKFIRE® Signature ® Series

Installation

Adjusting the Positive Stops
Positive stops dictate the range of motion for the booms. If set incorrectly, damage may occur to the equipment and/or
vehicles. After the initial setup, they may need to be adjusted for optimum performance.
It is suggested that initial runs are performed with the Positive Stops fully extended as shown below.

Note: The inside Positive-Stops are to be adjusted so that the Shafts are not over center or in the
path of the vehicle.

Utility Connections

Pneumatic (Air) Connections Air-Over-Oil Reservoirs
Feed from Small Regulator
on the Air Panel (Purple or

Feed from Air Panel (Green)

Airline colors stated are suggestions to aid repairs and trouble-shooting.

1MANUL826 Belanger, Inc. * 1001 Doheny Ct. * Northville, MI 48167 * Ph (248) 349-7010 * Fax (248) 380-9681 35