Page 41 - QuickFire® Wrap Around Signature® Series

QUICKFIRE® Signature ® Series

Installation

Utility Connections
7) Remove the cover of the enclosure and secure it to the four threaded holes on top of the leg
assembly as shown below.

Before After

8) Locate the parts shown below.
Cap Screw and
Loop Clamp Conduit
Lock Washer

47”

The images below show how to connect the conduit to the fittings.
• Remove the cord grip from the base. • Secure the cord grip back into
Base • Slide the conduit through the cord place
grip and into the base

Cord
Grip

Conduit

9) Slide the two clamps over the conduit in the orientation shown. Secure the conduit into the fitting of
the electrical enclosure. Fasten the loop clamps into the threaded holes as shown below.

Secure the Loop
Clamps
Slide Clamps
Over Hose

10) Repeat this process on the other side

1MANUL826 Belanger, Inc. * 1001 Doheny Ct. * Northville, MI 48167 * Ph (248) 349-7010 * Fax (248) 380-9681 37