Page 40 - QuickFire® Wrap Around Signature® Series
P. 40

QUICKFIRE® Signature ® Series


             Installation


             Utility Connections
                    1)  Locate 1/2”, 90° liquid-tight conduit fittings and install into covers as shown.














                    2)  Slide fitting caps onto the 20” black conduit from the boom utility mounts. Feed wire through
                       conduit fittings into motor covers. Slide the black conduit into fittings and secure cap.

                    3) Remove gearbox/motor electrical box covers.
                    4)  Feed wires through motor cord grip all the way  to the ring terminus and secure to the (4) wire
                       leads.
                       Note:  See electrical schematics in MCC Panel for terminating wire lends and wiring
                               schematics on motor/gearbox and inside motor/gearbox junction box cover.
                    5)  Locate the following parts and secure them into place as shown below.

                                  Manifold Assembly   3/8-16 x 1-1/4” SHCS   1CAP124





















                                            Before                             After

                    6)  Locate the gray electrical box the four socket-head cap screws as shown below.
                                              Electrical   1FSTNR-SH767
                                              Enclosure     Socket Head











              36          Belanger, Inc. * 1001 Doheny Ct. * Northville, MI 48167 * Ph (248) 349-7010 * Fax (248) 380-9681           1MANUL826
   35   36   37   38   39   40   41   42   43   44   45