Page 25 - Pivoting Wheel Stinger™ Mix and Match

PIVOTING WHEEL STINGER Mix and Match

Operation

After the initial startup, verify that none of the nozzles are clogged. If any of them are, remove them,
clean out the obstruction and replace them.
Begin by setting the main air regulator at 80PSI on the Air Panel.

Adjusting the Proximity Targets

Three Points of Adjustment
• Cylinder engagement through setting of Proximity Target
• Rate of application swing by adjusting Hydraulic Flow Control
• Rate of return swing by adjusting Pneumatic Flow Control

Depending on desired performance, the controls will have their own effect on the operation with their adjustment.
1) Cylinder Engagement through Setting of Proximity Target.
Since the “intitial” position has the arms at approximately 17° towards the entrance of the wash, gravity
supplies the force needed to start the arms movement. As the arms approach their vertical (straight up and
down) position, the force of gravity diminishes before this force has completely diminished, the hydraulic
cylinder engages. The power of the cylinder moves the arms to appromately 17° towards the exit of the wash
to complete the swing.

End of fowrad
Rest position at 17° Vertical position motion position at
towards the entrance 17° towards the exit

See images below to identify the important components and positions for proper adjustments.

Proximity Switch Mount remains in fixed position. The Targets and Target Mount moves
Proximity
Targets

When positioned in this When positioned in this This target ends the
area, engages cylinder later area, engages cylinder forward swing and
in downward swing. earlier in downward triggers the return.
i
The following adjustments effect the forward movement of the Stinger arms.
The following adjustments effect the return movement of the Stinger arms.
The return swing is initiated by the second target shown below. These images show the effect of repositioning the target.

When positioned in this When positioned in this
area, the return motion area, the return motion

begins earlier. begins later.

1MANUL586 Belanger, Inc. * 1001 Doheny Ct. * Northville, MI 48167 * Ph (810) 349-7010 * Fax (810) 380-9681 23