Page 16 - MixStir® Chemical Delivery System
P. 16
MIXSTIR® CHEMICAL DELIVERY SYSTEM
Introduction
Before You Get Started
Tools needed for installation:
Hammer drill with 3/8” bit Tape measure
Miscellaneous hand tools Level
Facility suitable 3/8” wall anchors Safety glasses
25 foot extension cord Work gloves
Component Specific Equipment Included:
MixStir® Tank
A Rotational molded dilution-holding reservoir, with a wall mount bracket.
A Hydro-Minder series Proportioning and Dispensing system that provides consistently mixed
solution.
MixStir® Tank with 4.5 GPM Air Pump
A Rotational molded dilution-holding reservoir, with a wall mount bracket.
A Hydro-Minder series Proportioning and Dispensing system that provides consistently mixed
solution.
A Tank-Mounted Delivery Panel with:
¾ A Flojet® air powered diaphragm pump rated at 4.5GPM, with Santoprene seals. The Flojet® pump is a
self-priming pump and does not require a check valve on the pickup side of the chemical supply line.
¾ One 0-100 PSI Air Regulator
¾ One 110 V Solenoid Valve
MixStir® Tank with two 4.5 GPM Air Pumps
A Rotational molded dilution-holding reservoir, with a wall mount bracket.
A HydroMinder series Proportioning and Dispensing system that provides consistently mixed
solution.
Two Tank-Mounted Delivery Panels. Each panel includes:
¾ A Flojet® air powered diaphragm pump rated at 4.5GPM, with Santoprene seals. The Flojet® pump is a
self-priming pump and does not require a check valve on the pickup side of the chemical supply line.
¾ One 0-100 PSI Air Regulators.
¾ One 110 V Solenoid Valve
12 Belanger, Inc. * 1001 Doheny Ct. * Northville, MI 48167 * Ph (248) 349-7010 * Fax (248) 380-9681 1MANUL450
