Page 19 - MixStir® Chemical Delivery System
P. 19
MIXSTIR® CHEMICAL DELIVERY SYSTEM
Installation
Mounting the MixStir®
1) Locate the MixStir® assembly and notice the mounting orientation as shown below.
Basic, Single or Twin Panel
Triple Foam Panel System
System
2) On the rear of the tank assembly there is an overflow fitting that will require a 1/2” hose that
is run down to a splash-safe location.
3) Determine the location in the building where the MixStir® is going to be located. Position it
on wall allowing for placement of chemical drums to be located under the holding tank.
Note: To maximize the efficiency of your MixStir® a location should be selected that will
minimize the utility lines length.
As stated above, there are two types of wall mounting bracket available for the MixStir®.
Your purchase determines the type that shipped with your unit. See the images below for
identification.
Basic, Single or Triple Foam Panel Twin Panel System
System
1MANUL450 Belanger, Inc. * 1001 Doheny Ct. * Northville, MI 48167 * Ph (248) 349-7010 * Fax (248) 380-9681 15
