Page 22 - MixStir® Chemical Delivery System
P. 22

MIXSTIR® CHEMICAL DELIVERY SYSTEM

             Installation


             Optional Hand-Spray Chemical Applicator

             The Hand-Spray chemical system is an applicator that has been designed to operate in conjunction with a MixStir® chemical mixing
             tank.
             The hand-spray applicator utilizes a trigger-jet style hand spray gun, with an adjustable cone-jet spray nozzle. Designed for comfort and
             ease of operation, the hand-spray applicator provides easy fingertip control to adjust spray pattern, capacity (GPM), spray angle and
             coverage. Each trigger-jet hand spray gun is assembled with a 20-ft length of coiled 1/4-inch line. The aluminum mounting plate has
             been designed to mount either a single hand spray gun, or a pair of hand spray guns.
             A MixStir® chemical mixing tank with a basic delivery panel will provide the method of delivering solution to the hand-spray gun. The
             Hand-Spray chemical system is capable of being setup as either an on-demand feature or as part of a car wash package, and is ideal
             for, but not limited to vehicle prep applications such as tire dressing and bug spray applications.
             The Hand-Spray chemical system is available with Blue or Red coiled hose and a matching MixStir® chemical mixing tank. The basic
             system consists of a pair of mounting plates, containing a single hand spray gun on each plate, and includes a corresponding MixStir®
             tank (HHS-BLU or HHS-RED). A combination system is also available, which includes a pair of mounting plates, containing one blue and
             one red hand spray gun on each plate, and includes one blue and one red MixStir® chemical mixing tank. The combination of utilizing
             two MixStirs® provides both a practical and cost-effective method for multiple hand-applied chemical applications.










                              Single Spray Unit                                 Dual Spray Unit


                1)  Secure the two wall plates to the wall in the appropriate location.
                2)  Run a chemical line from the “OUT” port of the MixStir® pump to a field supplied tee above
                    the wash and route to the two fittings as shown below. Refer to the “Startup” section in this
                    document for priming information.


                                 Chemical Feed from MixStir®






























              18          Belanger, Inc. * 1001 Doheny Ct. * Northville, MI 48167 * Ph (248) 349-7010 * Fax (248) 380-9681            1MANUL450
   17   18   19   20   21   22   23   24   25   26   27