Page 15 - Gyro Wrap™

™
GYRO WRAP

Electric Drive Considerations

Motor Assembly Component Orientation

Parts Identification (Electric Drive)

Motor/Gearbox

Motor Junction Box and Electrical Feed

Spin Stop

Sticker located here
indicates Driver Side or
Passenger Side
Gyro Head Mounting Plate
Parts identification for electric drive Gyro Head
Note: Above image shows driver side motor and mounting assembly.
Gyro Head™ Overview
Confirm that the following items have the correct orientation:
• Motor and Spin Stops: Inspect and compare positioning of your spin stops
• Gearboxes: The gearboxes have a specific orientation, which is determined by the offset of the
hole on top.
• Junction Boxes: The junction box cable opening MUST point downward
Overhead View
Driver Passenger
side side

DIRECTION
of
TRAVEL

There are Stauff clamp tabs on both sides of the arms allowing the Motor/Gearboxes Assemblies to be
identical. The goal is to run the electrical feeds on the inside of the arms and not cross over the
gussets. This tab configuration also allows for a right hand drive system whereas the arms will be
switched.

1MANUL247 Belanger, Inc. * 1001 Doheny Ct. * Northville, MI 48167 * Ph (248) 349-7010 * Fax (248) 380-9681 13