Page 16 - DuraJet™ / AlumaJet™ Arches
P. 16
DURAJET™ ARCH
Specifications
Requirements
Physical
Tunnel space required 28-1/2”
Unit height 122”
Unit width 163”
Utility
Electrical 120VAC (for Controller, Air Panel, LED Package)
3-Phase (for 1/3 HP Electric Motor)
Pneumatic 1SCFM @ 100 psi (for Flipping Cylinder)
(2) 1/4” Polyflow Lines (between Air Panel and Flipping
Cylinder Controls on Machine)
Water 36 GPM @ 600 psi or 1100 psi (to feed nozzles)
Output
Physical
Vehicle clearance, height 88”
Vehicle clearance, width 145”
DISCONNECT AND LOCKOUT ELECTRICAL POWER AND DISSIPATE ALL
POTENTIALLY HAZARDOUS ENERGY SOURCES BEFORE SERVICING ANY
EQUIPMENT!
CAUTION
Always wear safety glasses when performing maintenance on any equipment
CAUTION
It is recommended that a licensed electrician is contracted to perform all electrical installations.
CAUTION
A compressed Air System should be set correctly to support 90 PSI necessary to operate
equipment, but should never be set to deliver more than 120 PSI air pressure to the Belanger®
specified equipment.
12 Belanger, Inc.® *PO BOX 5470 *Northville, MI 48167-5470 * Ph (248) 349-7010 * Fax (248) 380-9681 1MANUL028
