Page 18 - DuraJet™ / AlumaJet™ Arches

DURAJET™ ARCH

Installation

Arch Assembly

1. Place the Head assembly in the bay so that the main feed manifold is on the exit side of the
machine. See the image below.

Direction Main Feed
Of Travel Manifold

Head
Assembly

2. Lift the Head assembly. Using a fork lift and 2 C-clamps, clamp the Head assembly to each
fork. A typical clamping set up is shown below.

14 Belanger, Inc.® *PO BOX 5470 *Northville, MI 48167-5470 * Ph (248) 349-7010 * Fax (248) 380-9681 1MANUL028