Page 71 - FreeStyler® Maintenance Manual
P. 71
®
MAINTENANCE
Chapter 3 General Repairs
Repair Section Overview
The topic of this section is possible failure modes and how to repair the machine when one of these
unlikely failures occurs. Most of these failures do not occur during normal machine operation however
it is impossible to completely eliminate the possibility of these failures.
It is also important to note that all of the replacement components and part numbers are located in
Chapter 4: Replacement Parts and Exploded Views in this manual.
Top View of the Carriage with all Wired Components
All reed switches and sensors are wired to the carriage sensor junction blocks (3 in total).
Selected parts of the Carriage have been removed for clarity.
Driver Side Exit Side of Carriage
Exit Reed Switch
Passenger Side
Carriage Pneumatic Carriage Valve Exit Reed Switch
Junction Block Junction Block
Water/Chemical Carriage Sensor
Pneumatic Valve Stacks Manifolds Junction Block
See the View on
Driver Side
Top Wheel Reed Switch the Next Page
Carriage with Selected Passenger Side
Driver Side Parts Removed for Clarity Enter Reed
Enter Reed Switch Enter Sonar Switch (2)
Entrance Side of Carriage
Driver Side of Carriage Passenger Side of Carriage
Direction
of Travel
1MANUL222 Belanger, Inc.® * PO BOX 5470 * Northville, MI 48167-5470 * Ph (248) 349-7010 * Fax (248) 380-9681 3-7