Page 8 - Funksjoner SCAFFPLANNER - NO

5. Select the product for the base plates
6. Select the product for the base collars
7. Click in the list and use the arrow up and down for changing the priority list of the decks.
When adding decks in the bays it will optimize the use of widths according to the total bay
width. It fills up with the first one and calculates when it should continue with the second
one to minimize the gaps.
8. Select the product for the consoles. Uncheck Console if consoles should not be used. The
same priority as for the bays is also used when adding decks to the consoles.
9. Select the product of the anchoring
10. Set the offset from the decks. Use negative value when locating the anchoring below the
decks
11. Set the distance from the centerline of the inner standard to the wall.